Ubushushu bokutya kwenyama Probe

Inyama Ubushushu bokutya Probe Featured Umfanekiso

Inkcazelo emfutshane:

Iprobe yeqondo lokushisa sisisombululo esifanelekileyo sokujongwa kweqondo lokushisa, ukubonelela ngokuchaneka okuphezulu kunye nokufundwa okuthembekileyo. Kulula ukuyifaka, ukugcinwa okuphantsi, kunye nokumelana kakhulu nokungcangcazela kunye nokothuka. Ngesisombululo sayo esiphezulu kunye nexesha lokuphendula elikhawulezayo, le NTC probe sensor lolona khetho lufanelekileyo lwaso nasiphi na isicelo sokuhlola ubushushu.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ithemometha yokutya yenyama probe

Ukusebenzisa i-high-thermal-conductivity conductive paste, eya kwandisa isantya sokubona. Singayila zonke iintlobo zeemilo kunye nobukhulu betyhubhu ye-SS304 ngokwemfuno yomthengi. Idimension yencam ecuthekayo yetyhubhu ye-SS304 ingalungelelaniswa kwiimfuno ezahlukeneyo zomlinganiselo wesantya sobushushu, kwaye umgangatho wobungqina bamanzi unokuba yi-IPX3 ukuya kwi-IPX7. Olu chungechunge lweemveliso lunomsebenzi oluzinzileyo noluthembekileyo, uvakalelo oluphezulu lobushushu.

Iimbonakalo:

1. Ubungakanani bunokwenziwa ngokwezifiso ngokuhambelana nolwakhiwo oluyiliweyo
2. Imbonakalo ingenziwa ngokwezifiso, isiphatho sePPS, iPEEK, i-aluminium, i-SS304 imathiriyeli
3. Uvakalelo oluphezulu lokulinganisa ubushushu, ukumelana nobushushu obuphezulu
4. Ixabiso lokuchasana kunye nexabiso le-B linokuchaneka okuphezulu, iimveliso zinokuhambelana okugqwesileyo kunye nokuzinza.
5. Uluhlu olubanzi lwezicelo
6. Iimveliso zihambelana ne-RoHS, i-REACH isatifikethi
7. Ukusetyenziswa kwemathiriyeli ye-SS304 edibana nokutya ngokuthe ngqo inokuhlangana ne-FDA kunye nesiqinisekiso seLFGB.
8. Ingenziwa ngokwezifiso kunye nenqanaba lobungqina bamanzi ukusuka kwi-IPX3 ukuya kwi-IPX7

Inkcazo:

1.Ingcebiso ngolu hlobo lulandelayo:
R25℃=98.63KΩ±1% B25/85℃=4066K±1% okanye
R25℃=100KΩ±1% B25/50℃=3950K±1% okanye
R200℃=1KΩ±3%, B100/200℃=4300K±2%

2. Uluhlu lobushushu obusebenzayo: -50℃～+300℃ okanye -50℃～+380℃
3. Ixesha le-Thermal rhoqo: MAX.10sec.
4. I-380℃ inqanaba lokutya le-SS304 elinemikhono ephothiweyo ngaphakathi kwentambo ye-PTFE iyacetyiswa
5. Isidibanisi sinokuba yi-2.5mm okanye i-3.5mm iplagi yomsindo
6. Ngaphezulu kweempawu zonke zinokulungiswa